Whynter ARC-148MS User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 18
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
15
CARE AND MAINTENANCE
IMPORTANT:
Switch off the air conditioner and disconnect the plug
from the power outlet
Drain water by removing the lower drain port drain
plug
Always transport the air conditioner in an upright posi-
tion only
CLEANING THE AIR FILTERS
To ensure the air intake is filtered properly and to as-
sure that your air conditioner runs efficiently, it is rec-
ommended to clean the air filters at least once every
two weeks
This unit has three air filters; the Silvershield pre-filter,
3M filter and the lower air filter
Switch off the air conditioner and the Silvershield pre-
filter and 3M filter from the unit (Fig. 7a and Fig. 7b)
Remove the lower filter by loosening the screw and
taking down the air inlet grille. (Fig. 7a)
Use a vacuum cleaner or tap lightly to remove loose
dust and dirt from the filters. Then rinse them thorough-
ly under warm or cold running water (no hotter than
100F.)
Dry thoroughly before re-inserting the filters. (Fig. 7c)
WARNING! Never operate the air conditioner without
the filter in place
CLEANING THE AIR CONDITIONER
Always switch off the air conditioner and disconnect the
plug from the power supply outlet before cleaning the
air conditioner
Use a soft damp cloth to wipe the body of the unit.
Never use harsh chemicals, oil-based products, deter-
gents, chemically treated cloths or other cleaning solu-
tions. These could possibly damage the body of the air
conditioner
END OF SEASON STORAGE
Switch off the air conditioner and disconnect the power
plug from the power supply outlet before cleaning the
air conditioner
Clean the air filters
Drain the condensed water completely
On a warm day, turn on the Fan only mode for half a
day so that the inside can dry out completely
Wrapped the power cord and bundle it with the tape
(Fig.29)
Remove the batteries from the remote controller
Wrap the cord using the Power Cord Buckle and insert
the plug into the Power Plug Socket. (Fig. 7d)
Place the storage cover over the air conditioner.
The Silvershield pre-
filter can be removed
for cleaning by pull-
ing the filter frame
back and out
Remove the screw,
then remove the lower
air filter
Install the Silvershield
pre-filter and filter frame
back to its place
Re-install lower air
filter and screw
Fig. 7a
Fig. 7b
Fig. 7c
Fig. 7d
Power Cord
Buckle
Power Plug
Socket
3M Filter
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments