Whynter ARC-148MS User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 18
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11
INSTALLATION
WINDOW KIT INSTALLATION IN A DOUBLE-HUNG WINDOW
1. Open window or sliding door for approxi-
mately 5”
2. Cut the foam seal A and B (adhesive
type) to the proper length and attach it to the
bottom of the window. Fig. 5a.
3. Adjust the length of the window slide
bars to the same length and width of the
opening of the window. Cut the window
piece if necessary to fit the length of your
window. Never cut into the exhaust hose
cut-out on the window slider kit. Fig. 5b.
4. Close the window on the window slide
bars. For long term installation, you may
screw the window kit into your window
frame using the security bracket. Fig. 5c.
5. Cut the foam seal C (non-adhesive) to
the length and seal the open gap between
the top window sash and outer window
sash. Fig. 5d.
WINDOW KIT INSTALLATION IN A SLIDING WINDOW/ DOOR
1. Open window or sliding door for approx-
imately 5”
2. Cut the foam seal (adhesive type) to
the proper length and attach it to the bot-
tom of the door / window. Fig. 6a.
3. Adjust the length of the window bars to
the same length and width of the opening
of the window. Cut the window piece if nec-
essary to fit the length of your window.
Never cut into the exhaust hose cut-out on
the window slider kit. Fig. 6b. Fig. 6b.
4. Close the door/ window on the window
slide bars. For long term installation, you
may screw the window kit into your window
frame using the security bracket. Fig. 6c.
5. Cut the foam seal C (non-adhesive) to
the length and seal the open gap between
the top window sash and outer window
sash. Show in Fig. 6d.
Foam seal A
(adhesive type)
Foam seal B (adhesive type)
Security bracket
Screws
Foam seal C
(non-adhesive type)
Foam seal A
(adhesive type)
Foam seal B
(adhesive type)
Security bracket
Screws
Foam seal C
(non-adhesive
type)
EXHAUST AND INTAKE HOSE INSTALLATION TO THE
WINDOW KIT
1. Make sure that window slider kit is securely installed.
2. Move the unit to the window, extend the exhaust hose,
align the hose connector and snap it into the window kit
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments