Whynter CDW-6831WES User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
23
Caring for the Dishwasher
The control panel can be cleaned by using a lightly dampened cloth and dry thoroughly.
The exterior can be cleaned using an appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
Cleaning The Door
To clean the edge around the door, use only a soft cloth dampened
with warm water. To avoid penetration of water into the door lock and
electrical components, do not use a spray cleaner of any kind.
WARNING!
Never use a spray cleaner to clean the door panel as it may damage
the door lock and electrical components.
Abrasive agents or some types of paper towels should not be used
because of the risk of scratching or leaving spots on the stainless
steel surface.
Protect Against Freezing
Please take frost protection measures on dishwasher in winter. After all washing cycles, please
operate as follows:
.1 Unplug the dishwasher from the power source.
.2 Turn off the water supply and disconnect the water inlet pipe from the water valve.
.3 Drain water from the inlet pipe and water valve. (Use a pan to catch the water)
.4 Reconnect the water inlet pipe to the water valve.
.5 Remove the filter and use a sponge to absorb excess water.
Cleaning the Spray Arms
The spray arms can be easily removed for periodic clean-
ing of the nozzles, to prevent possible clogging. Wash them
under running water and carefully replace them in their
seats, checking that their rotary movement is in no way im-
peded. Grasp the middle of the spray arm, pull it upwards
to remove it. Wash the arms under a jet of running water
and return them carefully to their seat.
After reassembly, check that the spray arms turn freely.
Otherwise, check if the sprays arms are installed correctly.
How to Keep Your Dishwasher in Shape
After Every Wash
After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture
and odors are not trapped inside.
Remove the Plug
Before cleaning or performing maintenance, always remove the plug from the socket.
No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water. To remove spots or stains from the surface of the interior, use a
cloth dampened with water with a little vinegar, or a cleaning product made specifically for dishwashers.
When it is not needed for a long time
It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of the appliance slightly open. This will help the door
seal to last longer and prevent odors from forming within the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be posi-
tioned on its back.
Door Seal
One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seal. Peri-
odic cleaning with a damp sponge will prevent this from occurring.
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments