Whynter BWR-545XS User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
Operation and Controls
NOTE: If the appliance is unplugged, encounter power interruption, or turned off, you must wait 3 -5
minutes before restarting the appliance. If attempted to restart before this time delay, the appliance may not start.
SETTING THE TEMPERATURE CONTROL
During normal operation, the temperature display on the control panel shows the temperature inside the appli-
ance.
When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults. The
preset temperature is 54ºF (12ºC).
You can press the left side UP and DOWN keys to control the internal temperature of the appliance.
The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once and will decrease
1ºC or 1ºF if you press the DOWN key once. The display flashes while you make the setting.
After the temperature has been set, the display will flash four times before it shows the current internal temper-
ature.
To view the set temperature at any time, press the UP or DOWN key, the set temperature will temporarily flash
in the display for 5 seconds. Then the display shows the current internal temperature
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the previous tem-
perature settings. When the power has restored, the temperature display will show the current cabinet tempera-
ture.
INTERIOR LIGHT
The interior light makes it easy to view your wine labels and enhances the display of your collection.
SWITCH ON LIGHT
- When the lights are off, touch the Light key to turn on lights.
SWITCH OFF LIGHT
- When the lights are on, touch the Light key to turn off lights twice.
CHANGE INDOOR LIGHTING COLOR
- When the lights are off, touch the Light key twice to enter color change mode. When color code window
display starts flashing, touch Up/Down keys to choose lighting color.
- When the lights are on, touch the Light key once to enter color change mode. When color code window
display starts flashing, touch Up/Down keys to choose lighting color.
See page 10 to view complete list of light codes and corresponding color.
CABINET SHELVES
NOTE: Do not cover any part of the shelves with aluminum foil or any other material that will prevent adequate air
circulation within the cabinet.
This appliance is equipped with removable shelves. To prevent damage to the door gasket, make sure the door is
opened completely before pulling the shelves out.
For easy access of the wine bottles, you must pull the shelves approximately ⅓ out of the railing.
The shelves are designed with an emergency stop to prevent them being removed too far when loaded.
When removing the shelves out of the railing, make sure to remove all items first.
To remove the shelves, pull the shelf forward until the notch aligns with the plastic post. Lift the shelf and
continue to pull the shelf forward until it is completely removed from the internal compartment.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments