Whynter WC-321DD Instruction Manual download pdf (Page 7)

4. Installation

Before using your wine cooler

 Remove the exterior and interior packaging material

 Stand the unit upright for approximately 2 hours before connecting to the power

source. This will reduce the possibility of a malfunction in the cooling system from

handling during transportation.

 Clean the interior surface with a soft cloth and warm water.

 Place your appliance on a floor that is strong enough to support the appliance when

it is fully loaded.

 Do not place the appliance in an enclosed space or under direct sunlight or sources

of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating

and heat sources may increase the ambient temperature and electrical consumption.

Extreme cold or hot ambient temperatures may also cause the appliance to

malfunction.

 Allow up to 24 hours of operation for the wine bottles to reach the desired

temperature.

Electrical Connection

This appliance should be properly grounded for your safety. The power cord of this unit

is equipped with a 3-pin plug to minimize the possibility of electrical shock. Do not under

any circumstances cut or remove the ground wine from the power cord supplied.

Use of extension cords is not recommended.

This unit requires a standard 110V-60HZ electrical outlet with 3-pin plug.

To prevent accidental injury, the power cord should be secured behind the wine

refrigerator and not left exposed or dangling.

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the

power cord is damaged, have it replaced by a qualified electrician.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Whynter WC-321DD Instruction Manual Page 7