Whynter ARC-13PG Use and Care Manual download pdf (Page 18)

The unit is set to low fan speed.

Set the unit to a higher fan speed.

The unit has worked for a long

time, but the room is not cold

enough

Windows or doors are open.

There are too many people in the room.

There is direct sunshine into the room.

The room is a kitchen or with many heat-

producing appliances

There is a server in the room.

The room is too large.

Close all windows and doors.

You may need additional cooling or another air conditioner.

Close curtains or blinds and try to minimize the amount of direct sunlight

into the room.

You may need additional cooling or another air conditioner.

The unit is very noisy

The unit is not level.

The surface underneath the unit is uneven.

Low power voltage.

Make sure the unit is on hard, level and stable surface.

Move the unit to a location with a level and hard floor.

Make sure the wall outlet and support the required power consumption

of the air conditioner and do not use an extension cord.

The unit leaks water

The unit is tilted or not leveled

The water tank is full.

Make use the unit is leveled.

Drain water from the drain plug at the back of the air conditioner.

Fan speed cannot be changed

Fan speed differences are not very noticeable

The fan speed difference is not very noticeable when the compressor is

on. Try setting the unit to Fan only mode, you should be able to hear the

difference between high and low fan speed settings.

1 2 ... 13 14 15 16 17 18 19 20

No comments

Whynter ARC-13PG Use and Care Manual Page 18