Whynter ARC-08WB Instruction Manual download pdf (Page 15)

15 | P a g e

WATER DRAINAGE

When the water level of the bottom tray reaches

maximum level, the unit will beep 8 times and the

digital display will show P1 symbol. Also, the

cooling or dehumidifying function will stop and the

fan only function will start.

Continuous drainage

In COOL or DRY modes, remove the upper

drain plug from the back of the unit and install

the drain water hose (5/8 universal female

mender) with ¾” hose (can be purchased

locally).

If this part is unavailable from your local

hardware store, just attach the drain hose to the

drain firmly. The hose will fit snug which should

prevent any leaking. Place the open end of the

hose directly over the drain area in your

basement floor. Please refer to Fig.21 & 22.

Manual drainage

Carefully move the unit to a drain location,

remove the bottom drain plug and let the water

drain (See Fig. 23). The P1 symbol will

disappear and the cooling or dehumidifying

function can be started. Be sure to reinstall the

bottom drain plug before using the unit.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

No comments

Whynter ARC-08WB Instruction Manual Page 15